Technology

Stainless steel 316/304 gratings with pressed clamp, Plates, bolt and nut

S.S grade 304 grating mesh, thickness is 4 mm, the height is 30 mm, size 1.5 meter × 1 meter × 30 mm.

Stainless steel 316L electro forged grating, frame size 45 mm × 3 mm × 6 mm twisted bar, grating size are 1000 mm × 350 mm and 1000 mm × 400 mm.

SS316 gratings - 30 × 60 mm or 30 × 90 mm mesh

  • Gratings panel size: 2438 mm × 6096 mm (in two pcs of 2438 mm × 2500 mm & 3596 × 1407 mm).
  • Load bar: 30 × 6 mm.
  • Bearing bar: 6 mm square twisted.
  • Mesh: 30 × 60 mm or 30 × 90 mm.

SS316 gratings - 40 × 40 mm mesh.

  • Gratings panel size: 2438 mm × 6096 mm.
  • Load bar:30 ×6 mm.
  • Bearing bar: 6 mm square twisted.
  • Mesh: 40 × 40 mm.

SS316L grating - 34 × 50 mm mesh.

  • Panel size - 2000 × 1000 mm.
  • Load bar 60 × 3 mm, load bar 34 mm spacing.
  • Load bar serrated.
  • Cross bar 6 mm dia. plain bar.
  • Cross bar 50 mm spacing.
  • Grating clips.

Stainless steel bar grating - GR. SS316L

  • Standard grating panels- GR. SS316L.
  • Load bar size: 60 × 3 mm.
  • Pattern: E50.
  • Load bar pitch: 34 mm.
  • Cross bar pitch: 50 mm.
  • Load bar type: serrated.
  • Cross bar type: 6 mm dia. plain round bar.
  • Panel size: 1000 mm × 2000 mm lb span.
  • Exclusions: kick-plates, cut-outs & fixing clips.
  • Unit weight: 40 kgs per panel.

Grating clamp - GR. SS316L

  • Comprising of saddle clip, pressed clamp.
  • Plates, bolt and nut (M8 × 90).
  • With complete standard accessories.

Stainless steel gratings for food factory

  • Width: 200 mm.
  • Grade: 304 (or) 316.
  • Use for food factory.
  • Load: 3-4 tons.

SS gratings grade 316 panels 4000 × 600 mm

  • The grating is NOT forge welded but pressure locked.
  • 32 × 5 mm load bar.
  • 100 mm pitch between twist rods – 6 mm.
  • 30 mm pitch between load bars.
  • Panel size – 4000 × 600 mm.
  • Material should be stainless Steel GRADE 316.

Stainless steel 304 gratings, L angle and clamping

  • Size: 500 × 1000 mm.
  • Outer flat bar: 40 × 5 mm.
  • Inner bearing bar: 40 × 5 mm @ 25 mm.
  • Cross bar: 20 × 5 mm @ 25 mm.
  • Material: SS 304.
  • L angle & clamping included.

Stainless steel gratings - serrated

  • Load bar: 25 × 2 mm.
  • Cross bar: 10 × 2 mm.
  • Banding bar: 25 × 3 mm.
  • Load bar pitch: 25 mm.
  • Cross bar size: 25 mm.
  • Load bar & cross bar type: serrated.
  • Material: stainless steel.
  • Finish: pickled finish.
  • Panel sizes:
    • 150 mm width × 1000 mm L.
    • 200 mm width × 1000 mm L.
    • 250 mm width × 1000 mm L.
    • 300 mm width × 1000 mm L.

Inquiry for Our Product

Mesh Reinforcing
E-mail: info@chinasteelgrating.com

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.