Welded Galvanized Steel Floor Grating Panels for Operating Floor

Grating for operating floor

• Material: ASTM A36.
• Mesh pitch: 33 × 33 mm.
• Load bearing bar size: 40 × 5 mm.
• Transverse bar size: dia. 5 mm (support bar).
• Binding bar size: 40 × 5 mm.
• Protection: all surfaces to be made free from rust and scale by chemical cleaning.
• Painting: apply coat of suitable bituminous paint by dipping dry film 60 micron.
• Grating size: 800 × 1000 × 40 mm, 1000 × 1000 × 40 mm, 1200 × 1000 × 40 mm, 1300 × 1000 × 40 mm.

Steel grating panel for floor, style, 35mm × 5mm, 915mm, 905mm

• Manufacturing process: pressure welded.
• Material: steel.
• Material, standard: BS 4360 GRADE 43A.
• Coating: hot dip galvanized.
• Application: industrial.
• Pitch, load-bearing bar: 30 mm - 33 mm.
• Pitch, transverse bar: 100 mm - 102 mm.
• Size, binding bar: 35 mm × 5 mm.
• Span, panel: 915 mm.
• Type, binding bar: banded.
• Weight, coating: average > 815 gm/m².
• Standard, external, coating: BS 729.
• Type: open steel flooring.
• Width, panel: 905 mm.
• Type, load-bearing bar: serrated.
• Type, transverse bar: square twisted.
• Size, transverse bar: 6 mm × 6 mm.

Galvanized steel floor gratings

• The shape of bearing bar: serrated type.
• Bearing bar pitches 30 mm.
• Cross bar pitches 100 mm.
• Surface treatment: hot-dip galvanizing, paint or other anti-corrosive coatings are available, of which hot-dip galvanizing is generally recommended.
• Material: Q235 in line with GB/T700 steel.
• Tolerance the allowed deviation of length is +0/-5 mm, while the allowed deviation of width is +/-5 mm. The non-perpendicularity of bearing bar is allowed no more than 10% of width of bearing bar. Cross bar surface should not surpass bearing bar surface 1 mm, beginning & end of cross bar should not surpass the end surfaces of two sides of grating 2 mm.
• Standard: U.K. STANDARD BS729.

Bar gratings for oil pier

• Grating, bar, 3 ft WD × 20 ft LG, bear bar 5 mm × 40 mm, hot dip galv.
• Material: A36.
• Dimensions: 40 mm × 5 mm (30 mm × 100 mm).
• Application: platform grating.
• Size: 3 ft × 20 ft.
• Type: serrated galvanized.
• Flooring, serrated surface, open steel, structural.
• Quality to ASTM A36/BS 4360 GR. 43A, galvanized.
• Supplied as panels, manufactured from 40 mm × 5mm steel main flat bar, spaced at 30 mm c/c, running the 20 feet length, with 6 mm square twisted cross bars, Spaced at 100 mm c/c, each panel would have perimeter of 40 mm × 5 mm.

Welded steel floor grating anti-slip

• Welded 6' × 2', 1/8" × 1" high × 1" spacing, anti slip.
• 25 pcs 304 stainless steel.
• 150 pcs galvanized steel.

Floor grating panels 3 meter length × 1 meter width

• Transverse for steel bars - 8 mm as per IS 1786.
• Transverse bar pitch: 100 mm.
• Load bearing bar pitch: 40 mm.
• Load bearing bar size: 25 mm × 5 mm as per IS 2062.