EnZar®

Welded Steel Bar Grating Panels - Carbon Steel or S.S

Panels welded carbon steel grating

  • Serrated Surface, as per ASTM A1011 CS Type B.
  • Fabrication: ANSI/NAAMM MBG531, ASTM A123 hot dip galvanized.
  • Panel dimensions: 3' × 20'.
  • Bearing bar size: 1" × 3/16" thick.
  • Bearing bar spacing / pitch 1-3/16".
  • Crossed bar size: 0.25".
  • Crossed bar spacing / pitch 4".

Welded steel grating, serrated

  • Size: 2m × 1m.
  • Bearing bar: 40 × 6 mm.
  • Bearing bar spacing: 25 mm.
  • Cross bar spacing: 50 mm.

Welded steel grating HDG to AS1650

  • Load bar centers: 22 mm.
  • Load bar section: 25 × 3 mm, 25 × 3 mm, 20 × 5 mm.
  • Cross bar details and centres: 6 mm twisted square bar at 100 mm centres.
  • Finish: HDG to AS1650.

Welded black (not galvanized) gratings panel

  • Welded black (not galvanized) gratings panel 6100 × 1000 mm (33 × 33 mm/30 × 2 mm).
  • Welded black (not galvanized) gratings panel 6100 × 1000 mm (33 × 33 mm/30 × 3 mm).
  • Welded gratings in 34 × 38 mm open mesh and 30 × 2 mm bearing bar.
  • Welded gratings in 34 × 38 mm open mesh and 30 × 3 mm bearing bar.
  • In 6 × 1m dimensions, up to fullfill a container of 24 tons (50% of each).
  • In self-colour or galvanized finish.

Packaging: export packaging, including fastened wooden blocks (sanitized certified) and square protections to allow handling with forklifts.